sothware

GS1 pallet labels explained: SSCC, GTIN and the logistic label

· 4 min read · Sothware

What goes on a GS1 logistic label, the difference between an SSCC and a GTIN, label sizes and placement, and why generating labels beats building them by hand.

If your warehouse ships pallets to retailers, distributors or 3PLs, sooner or later a customer will ask for "GS1 labels" or "SSCC labels". This guide explains what those are, what has to be on them, and how to stop building them by hand.

Two numbers that do different jobs

GS1 standards give every thing in the supply chain an identification key. Two matter most on a pallet label.

GTIN (Global Trade Item Number) identifies a product: anything that is priced, ordered or invoiced. GTINs come in four lengths (GTIN-8, GTIN-12, GTIN-13 and GTIN-14). The barcode on a box of medicine or a tin of beans carries a GTIN. Every identical unit of that product shares it.

SSCC (Serial Shipping Container Code) identifies one logistic unit: a specific pallet, case or parcel, for as long as it travels. It is 18 digits long and unique to that unit. Two pallets of the same product share GTINs, but never an SSCC.

Both end with a check digit calculated the same way, so scanners can catch a mistyped or misread number. Our free SSCC check digit calculator works it out for either, and can generate a run of SSCCs from your company prefix.

The distinction matters because they answer different questions. The GTIN says what is on the pallet. The SSCC says which pallet it is, which lets everyone in the chain track that exact unit, link it to a despatch advice, and receive it with one scan.

What is on a GS1 logistic label

The GS1 Logistic Label Guideline sets out a consistent layout so any partner can read any label. A few points surprise people:

  • The SSCC is the only mandatory piece of data. Everything else depends on what you and your trading partners agree.
  • The label is built from three blocks, top to bottom: free-format text and graphics (such as a logo or address), human-readable text with data titles, and barcodes with their human-readable line underneath. Only the barcode block is mandatory.
  • A label can have up to three segments for different parties, usually ordered carrier, customer, supplier from top to bottom.
  • The barcodes are GS1-128 linear barcodes. GS1 2D barcodes can be added alongside them.
  • An SSCC that is already on a unit must never be replaced by a new one further down the chain.

Size and placement

The guideline recommends A6 (105 × 148 mm) when the label carries the SSCC and little else, and A5 (148 × 210 mm) when it also carries trade item details such as GTIN, quantity, batch or best-before date.

On pallets, the barcodes should sit between 400 and 800 mm from the base and at least 50 mm from a vertical edge, so they can be scanned with the pallet on the floor or on forks. Labelling two adjacent sides is recommended.

Why building labels by hand goes wrong

Many warehouses start with a Word or Excel template: type the address, the business name, the pallet count and the pallet type, print, repeat. It works until volume grows. Then:

  • the same details are retyped for every pallet in a shipment, and every retype is a chance for an error;
  • special handling, such as cold storage, depends on someone remembering to mark it;
  • check digits and serial numbers have to be calculated and tracked somewhere, and a duplicated SSCC causes real problems at the receiving end;
  • there is no record of which labels were printed for which shipment.

Generating labels instead

The fix is to capture the shipment details once and let software produce every label from them. A good label generator:

  1. takes the shipment details in one simple form;
  2. produces one correctly laid-out label per pallet, with the pallet type and any handling flags carried through;
  3. allocates SSCCs from your GS1 company prefix in sequence, with correct check digits, and never reuses one;
  4. keeps a record of what was printed, for which shipment and when.

We built a label generator for a logistics client who was assembling pallet labels by hand in Word. Staff now enter the address, business name, pallet count and pallet type, including cold storage, once, and the software produces the labels ready to print. You can read the pallet label automation case study.

Labels are often the first step. Once shipment data is captured properly, it can feed goods-in and goods-out, stock visibility and despatch paperwork too, as in the goods-in/goods-out system we built for the same client.

Before you start

  • Get a GS1 company prefix if you will create your own SSCCs or GTINs. Numbers have to come from your own GS1 allocation.
  • Ask your customers what they require. Retailers and distributors often specify extra data, label size or EDI messages such as a despatch advice.
  • Test scanning on real printers and real pallets. Print quality and placement matter as much as the data.

If labelling or warehouse admin is eating your team's time, see how we work with logistics teams or tell us what you need.

Have a project in mind?

Book a free 30-minute call, tell us what you're trying to build, and we'll tell you honestly whether we're the right fit.

Book a call